“1. Which of the following is NOT an advantage of using standard costs and variances?
A. Use as a performance benchmark for evaluation of actual
costs
B. Use as a basis for components of the master budget
C. Simplification of bookkeeping
D. Change in behavior of managers to obtain desired
variances

2. One level of a companys flexible budget was prepared for
production of 8,000 units. Total costs were $38,000 and included direct
materials, direct labor, and variable overhead at $1.50, $2.50, and $0.50 per
unit respectively. What is the total cost of production of 8,500 units?
A. $ 2,000
B. $38,000
C. $38,250
D. $40,250

3. The direct
labor price variance was unfavorable and much greater than anticipated. Who
would be in the best position to explain why the unfavorable variance occurred?
A. Both the production and human resource supervisors
B. The production supervisor
C. The purchasing manager
D. Both the purchasing manager and production supervisor

4. A manager
purchased better quality materials for a slightly higher cost than anticipated.
However, as a result, there was less spoilage than normal. What is the effect
on the price and quantity variances respectively?
A. Favorable, favorable
B. Favorable, unfavorable
C. Unfavorable, favorable
D. Unfavorable, unfavorable

5. A company uses
a single raw material in its production process. The standard price for a unit
of material is $2.00. During the month the company purchased and used 600 units
of this material at a price of $2.25 per unit. The standard quantity required
per finished product is 2 units and during the month, the company produced 310
finished units. How much was the material price variance?
A. $150 favorable
B. $150 unfavorable
C. $155 favorable
D. $155 unfavorable

6. A company uses
a single raw material in its production process. The standard price for a unit
of material is $2.00. During the month the company purchased and used 600 units
of this material at a price of $2.25 per unit. The standard quantity required
per finished product is 2 units and during the month, the company produced 310
finished units. How much was the material quantity variance?
A. $40 favorable
B. $40 unfavorable
C. $45 favorable
D. $45 unfavorable

7. A company
produced 2,200 units of output during a production process that normally
requires 2 hours of labor per unit of output. The standard labor rate is $16
per hour, but the company paid $15 per hour. Actual hours needed to complete
the production process were 4,600. How much was the labor efficiency variance?
A. $3,000 favorable
B. $3,000 unfavorable
C. $3,200 favorable
D. $3,200 unfavorable

8. A company
produced 2,200 units of output during a production process that normally
requires 2 hours of labor per unit of output. The standard labor rate is $16
per hour, but the company paid $15 per hour. Actual hours needed to complete
the production process were 4,600. How much was the labor rate variance?
A. $4,400 favorable
B. $4,400 unfavorable
C. $4,600 favorable
D. $4,600 unfavorable

9. Which of the
following formulas is used to compute variable overhead rate (or spending)
variance?
A. actual hours (actual rate standard rate)
B. standard hours allowed (actual rate standard rate)
C. actual rate (actual hours standard hours allowed)
D. standard rate (actual hours standard hours allowed)

10. Which of the following is
a true statement regarding fixed overhead volume variance?
A. If production volume is less than anticipated, then fixed
overhead has been underallocated and the fixed overhead volume variance is
favorable.
B. If production volume is less than anticipated, then fixed
overhead has been underallocated and the fixed overhead volume variance is
unfavorable.
C. If production volume is greater than anticipated, then
fixed overhead has been underallocated and the fixed overhead volume variance
is favorable.
D. If production volume is greater than anticipated, then
fixed overhead has been overallocated and the fixed overhead volume variance is
unfavorable.
1. Which of the following is NOT an advantage of using
standard costs and variances?A. Use as a performance benchmark for evaluation of actual
costsB. Use as a basis for components of the master budgetC. Simplification of bookkeepingD. Change in behavior of managers to obtain desired
variances2. One level of a companys flexible budget was prepared for
production of 8,000 units. Total costs were $38,000 and included direct
materials, direct labor, and variable overhead at $1.50, $2.50, and $0.50 per
unit respectively. What is the total cost of production of 8,500 units?A. $ 2,000B. $38,000C. $38,250D. $40,2503. The direct
labor price variance was unfavorable and much greater than anticipated. Who
would be in the best position to explain why the unfavorable variance occurred?A. Both the production and human resource supervisorsB. The production supervisorC. The purchasing managerD. Both the purchasing manager and production supervisor4. A manager
purchased better quality materials for a slightly higher cost than anticipated.
However, as a result, there was less spoilage than normal. What is the effect
on the price and quantity variances respectively?A. Favorable, favorableB. Favorable, unfavorableC. Unfavorable, favorableD. Unfavorable, unfavorable5. A company uses
a single raw material in its production process. The standard price for a unit
of material is $2.00. During the month the company purchased and used 600 units
of this material at a price of $2.25 per unit. The standard quantity required
per finished product is 2 units and during the month, the company produced 310
finished units. How much was the material price variance?A. $150 favorableB. $150 unfavorableC. $155 favorableD. $155 unfavorable6. A company uses
a single raw material in its production process. The standard price for a unit
of material is $2.00. During the month the company purchased and used 600 units
of this material at a price of $2.25 per unit. The standard quantity required
per finished product is 2 units and during the month, the company produced 310
finished units. How much was the material quantity variance?A. $40 favorableB. $40 unfavorableC. $45 favorableD. $45 unfavorable7. A company
produced 2,200 units of output during a production process that normally
requires 2 hours of labor per unit of output. The standard labor rate is $16
per hour, but the company paid $15 per hour. Actual hours needed to complete
the production process were 4,600. How much was the labor efficiency variance?A. $3,000 favorableB. $3,000 unfavorableC. $3,200 favorableD. $3,200 unfavorable8. A company
produced 2,200 units of output during a production process that normally
requires 2 hours of labor per unit of output. The standard labor rate is $16
per hour, but the company paid $15 per hour. Actual hours needed to complete
the production process were 4,600. How much was the labor rate variance?A. $4,400 favorableB. $4,400 unfavorableC. $4,600 favorableD. $4,600 unfavorable9. Which of the
following formulas is used to compute variable overhead rate (or spending)
variance?A. actual hours (actual rate standard rate)B. standard hours allowed (actual rate standard rate)C. actual rate (actual hours standard hours allowed)D. standard rate (actual hours standard hours allowed)10. Which of the following is
a true statement regarding fixed overhead volume variance?A. If production volume is less than anticipated, then fixed
overhead has been underallocated and the fixed overhead volume variance is
favorable.B. If production volume is less than anticipated, then fixed
overhead has been underallocated and the fixed overhead volume variance is
unfavorable.C. If production volume is greater than anticipated, then
fixed overhead has been underallocated and the fixed overhead volume variance
is favorable.D. If production volume is greater than anticipated, then
fixed overhead has been overallocated and the fixed overhead volume variance is
unfavorable.”